Control Module Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the seat adjustment control module. Refer to SEAT ADJUSTMENT CONTROL MODULE, REMOVING AND INSTALLING .

-- Press the pin -2- in the direction of the cushion out of the clip -arrow A- of the bracket -1-.

Fig 1: Bracket -1- & Pin -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the pin that was pressed out from the seat pan.

-- Remove the support foot from the bracket -2- of the seat frame.

Fig 2: Bracket -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- For this purpose, unclip the clip -arrow A- from the seat frame -1-.

-- Unclip the retaining tabs -arrow B- (quantity: 2).

-- Carefully remove the bracket in the direction of the -arrow- from the seat pan.

-- Remove the bracket from the seat pan.