Power Steering Assembly Overview, RHD: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Heat Shield
- Hex bolt
- 10 Nm
- Self-Locking Nut
- Always replace if removed
- Wheel Bearing Housing
- Tapered holes must be free of oil and grease
- If necessary, clean with a dry rag, do not use cleaning solvent
- For the allocation. Refer to the Parts Information.
- Self-Locking Nut
- 90 Nm
- Always replace if removed
- Power Steering Gear
- Removing and installing. Refer to POWER STEERING GEAR, REMOVING AND INSTALLING, RHD .
- Subframe
- Hex bolt
- 90 Nm +90° additional turn
- Always replace if removed
- Heat Shield
- Hex bolt
- 9 Nm
- Bolt
- 30 Nm
- Return Line
- Pressure Line
- Seal
- Always replace
- Servotronic Solenoid Valve -N119-