LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> e-Golf SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Airbag System (Diagnostics)) >> Subaru Select Monitor >> Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Subaru Select Monitor: Operation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prepare the Subaru Select Monitor kit. < Ref. to SPECIAL TOOL , PREPARATION TOOL, General Description. >
  2. Connect the diagnosis cable to the Subaru Select Monitor.
  3. Connect the Subaru Select Monitor to the data link connector.
    1. Data link connector is located in the lower portion of instrument panel (on the driver's side).
      Fig 1: Locating Data Link Connector In Lower Portion Of Instrument Panel (On Driver's Side)
      G07672881Courtesy of SUBARU OF AMERICA, INC.
    2. Connect the diagnosis cable to the data link connector.
      CAUTION: Do not connect scan tools other than the Subaru Select Monitor.
  4. Turn the ignition switch to ON (engine OFF) and run the Subaru Select Monitor.
scientia non olet · About LEMON Manuals