Front ABS Wheel Speed Sensor: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Disconnect the ABS wheel speed sensor connector located next to the front strut mounting house in the engine compartment.
Remove the bolts and then remove the sensor harness bracket.

Fig 1: Front ABS Wheel Speed Sensor Connector And Sensor Harness Bracket With Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which secure the sensor harness to the front strut.
Remove the bolts, and remove the front ABS wheel speed sensor from the front housing.
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
  
  Fig 2: Locating Front ABS Wheel Speed Sensor Bolts
  Courtesy of SUBARU OF AMERICA, INC.