Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Washer Fluid Level Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Turn Off The Ignition And Remove The Key.

-- Remove The Left Front Wheel.

-- Remove The Left Front Wheel Housing Liner. Refer To FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, AUDI RS5 .

-- Disconnect The Connector -1-.

-- Place A Drip Tray Under The Windshield Washer Fluid Reservoir.

-- Remove The Windshield Washer Fluid Level Sensor -G33- -Item 3- From The Washer Fluid Reservoir -4-.