Overview - Windshield Washer System: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Washer Fluid Reservoir, Hoses And Nozzles

Courtesy of AUDI OF AMERICA, LLC

Screw
- Tightening Sequence. Refer To Figure
O-Ring
- Replace if damaged.
Grommet
- Replace if damaged.
Filler Tube
- For the washer fluid reservoir
- Removing and installing. Refer To WASHER FLUID RESERVOIR FILLER TUBE, REMOVING AND INSTALLING .
Support Ring
Nut
- Threaded Connection Shared With Tower Brace
- Tightening Specification. Refer To MOUNTING BRACKET, SHOCK ABSORBER FORK, UPPER CONTROL ARM AND TOWER BRACE OVERVIEW
Cap
- For the filler neck
Washer Fluid Hose
- For the windshield washer system
Right Spray Nozzle
- Depending on vehicle equipment with Right Washer Nozzle Heater -Z21-
- Removing and installing. Refer To SPRAY NOZZLES, REMOVING AND INSTALLING .
- Adjusting. Refer To SPRAY NOZZLES, ADJUSTING
Left Spray Nozzle
- Depending on vehicle equipment with Left Washer Nozzle Heater -Z20-
- Removing and installing. Refer To SPRAY NOZZLES, REMOVING AND INSTALLING .
- Adjusting. Refer To SPRAY NOZZLES, ADJUSTING
Washer Fluid Reservoir
- Removing and installing. Refer To WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .
Headlamp Washer Pump -V11-
Grommet
Washer Fluid Hose
- For the headlamp washer system
Retaining Ring
- For Windshield Washer Pump -V5-
Windshield Washer Pump -V5-
- Removing and installing. Refer To WINDSHIELD WASHER PUMP, REMOVING AND INSTALLING .
Grommet
Screw
- Tightening Sequence. Refer To Figure
Grommet
Windshield Washer Fluid Level Sensor -G33-
- Removing and installing. Refer To WINDSHIELD WASHER FLUID LEVEL SENSOR, REMOVING AND INSTALLING .