Clear Memory Mode: Operation: ECM

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

On << Main Menu >> display, select {Each System Check}.
On << System Selection Menu >> display, select {Engine Control System}.
After engine type information is displayed, select [OK].
On << Engine Diagnosis >> display, select {Clearing Memory}.
When "Done" is displayed on the display, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to PC application help for Subaru Select Monitor.