Second Row Seat: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
Install the second row seat bolts in the following sequence.
1. Install the LH rear outboard bolt.
  Torque: 35 lb.ft (47.5 Nm)
2. Install the RH rear inboard bolt.
  Torque: 35 lb.ft (47.5 Nm)
3. Install the LH front outboard bolt.
  Torque: 35 lb.ft (47.5 Nm)
4. Install the RH front inboard bolt.
  Torque: 35 lb.ft (47.5 Nm)
Courtesy of FORD MOTOR COMPANY
If equipped with inflatable seatbelts, repower the SRS Refer to: Supplemental Restraint System (SRS) Repowering .