SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

On the << Main Menu >> display screen, select the {Each System Check}.
On the << System Selection Menu >> display screen, select the {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On the << Engine Diagnosis >> display screen, select the {Clear Memory}.
When the "Clear Memory?" is shown on the screen, click the [Yes] button.
When "Done" and "Turn ignition switch to OFF" is shown on the display screen, turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. For this reason, start the engine after 10 seconds or more have elapsed since the ignition switch was turned to ON.
- For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.