LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> e-Golf SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Engine Controls (Diagnostics) (H4DO)) >> Drive Cycle >> Procedure >> Preparation For Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For Drive Cycle

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 l  (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and Clear Memory Mode, check that no DTC remains. < refer to CLEAR MEMORY MODE . >
  3. Check the delivery (test) mode connector is disconnected.
    NOTE:
    • Perform the drive cycle after warming up the engine except when the engine coolant temperature at engine start is specified.
    • Perform the drive cycle twice if the DTC in the list is marked with *. After completing the first drive cycle, stop the engine and perform second diagnosis in same condition.
scientia non olet · About LEMON Manuals