Data Link Connector: Note
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
This connector is used for Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.
TERMINAL REFERENCE CHART
| Terminal No. | Remarks |
|---|---|
| 1 | Empty |
| 2 | Empty |
| 3 | Empty |
| 4 | Ground |
| 5 | Ground |
| 6 | CAN communication (Hi) |
| 7 | Subaru Select Monitor signal |
| 8 | Empty |
| 9 | Empty |
| 10 | Empty |
| 11 | Empty |
| 12 | Empty |
| 13 | Empty |
| 14 | CAN communication (Lo) |
| 15 | Empty |
| 16 | Power supply |