Section 121 (Wheel And Tire System): General Description: Specification: Notes

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wheel And Tire Offset

Courtesy of SUBARU OF AMERICA, INC.

GENERAL SPECIFICATION CHART

Tire size	Wheel size	Offset mm (in)	P.C.D. mm (in)	Tire inflation pressure kPa (kgf/cm² , psi)
Tire size	Wheel size	Offset mm (in)	P.C.D. mm (in)	Front wheel	Rear wheel
P215/65R16 96H	16 x 61/2J 16 x 61/2J	48(1.89)	100(3.94)	⁽⁾
P225/55R17 95H	17 x 7J 17 x 7JJ	48(1.89)	100(3.94)	⁽⁾

GENERAL SPECIFICATION CHART

Spare tire size

Wheel size

Offset mm (in)

P.C.D. mm (in)

Tire inflation pressure kPa (kgf/cm² , psi)

Front wheel

Rear wheel

T155/70D17 110M

17 x 4T

40 (1.57)

100 (3.94)

⁽¹⁾

P215/65R16 96H (C4 only)

16 x 61/2J
16 x 61/2JJ

48 (1.89)

P225/55R17 95H (C4 only)

17 x 7J
17 x 7JJ

⁽¹⁾	Size and inflation pressure of the standard equipment tire, spare tire for emergency and appropriate tire for equipment are described on the "Tire inflation pressure" label attached to the body side of the driver's door.

NOTE:

T-type tire is prepared for temporary use as a spare tire.
Depending on the model destination, the equipped spare tire will differ.