Voice Recognition System, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the Information Electronics Control Module 1 -J794-. Refer to Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING .
Perform the following function test:
-- Switch on the Radio -R-.
-- Press the PTT button on the multifunction steering wheel briefly.
A "Ping" tone sounds, the speech input system is active.
-- Say the command "Help".
Since the Radio -R- is active, the speech dialog system responds with "Commands for the radio are...".
Depending on the equipment, other functions can be selected:
-- If a telephone is installed, say "telephone".
The voice recognition system switches to the telephone mode.
-- Press the PTT button for 1 second.
The voice recognition system responds with "Cancel" and is deactivated.