Rear Seat: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: If the hooks on the vehicle body side is disengaged (remained on the seat cushion side) when removing the rear seat cushion, always replace with new hooks to prevent the decline of the fixed force of the seat.

Fig 1: Rear Seat Cushion Hook

Courtesy of SUBARU OF AMERICA, INC.

Install each part in the reverse order of removal.
Tightening torque:

Refer to "COMPONENT" < Ref. to REAR SEAT , COMPONENT, General Description. >
Route the seat belt securely. < Ref. to INSTALLATION , Rear Seat Belt. >