Hid Headlight Ballast

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When installing the ballast cover, be sure to install the gasket.
After installing the ballast to the vehicle, be sure to perform beam adjustment.

Assemble each part in the reverse order of removal.

Tightening torque:

1.3 N.m (0.13 kgf-m, 0.96 ft-lb)

NOTE: Adjust the projector lens to near the center of the extension opening before installing the ballast. This makes the beam adjustment work easier.