Door Step Light: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the door step light.
CAUTION: Be careful not to damage light and door trim.

Fig 1: Inserting Flat Tip Screwdriver Into Slit Of Door Step Light Body
Courtesy of SUBARU OF AMERICA, INC.
1. Insert a flat tip screwdriver into the slit of the door step light body to remove the door step light.
2. Disconnect the harness connector.
Remove the bulb.

Fig 2: Locating Bulb
Courtesy of SUBARU OF AMERICA, INC.