Instrument Cluster With Instrument Cluster Control Module -J285-, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Fiber-Optic Repair Set - Connector Protective Caps :VAS6223/9 from Fiber-Optic Repair Set :VAS6223B

NOTE:

All Indicator Lamps In The Instrument Cluster Are Fitted With LEDs. In Case An Indicator Lamp Is Malfunctioning, The Instrument Cluster Must Be Replaced.

Do Not Disassemble The Instrument Cluster.

It Is Not Necessary To Remove The Steering Wheel To Remove The Instrument Cluster.

-- If the instrument cluster with the Instrument Cluster Control Module -J285- was replaced, select the "Replace" function for the corresponding control module in the "Guided Fault Finding " or "Guided Functions". Refer to Vehicle Diagnostic Tester.