Check Room Light Operation
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE CHART
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK ROOM LIGHT OPERATION. Make sure the room light illuminates when the room light switch is ON, and goes off when the switch is OFF. |
Does the room light illuminate or go off? | Go to step 2. | Check the room light circuit. < Ref. to INSPECTION , Room Light . > |
2 CHECK ROOM LIGHT OPERATION.
|
Does the room light illuminate ↔ go off (including off delay) when the door is opened and closed? | Go to step 3. | Go to step 4 . |
| 3 CHECK KEYLESS ENTRY OPERATION. Press the LOCK/UNLOCK button of the keyless transmitter. |
Does it operate properly? | Room light is normal. | Check keyless entry system. < Ref. to SYMPTOM CHART , INSPECTION, Keyless Entry System . > |
4 CHECK ROOM LIGHT.
|
Is room light normal? | Go to step 5. | Replace the bulb or room light assembly. |
5 CHECK HARNESS.
|
Is harness normal? | Go to step 6. | Repair or replace the harness. |
| 6 CHECK HARNESS. Measure the voltage between room light and chassis ground. Connector & terminal Model without sunroof (R52) No. 1 (+) - Chassis ground (-): Model with sunroof (R52) No. 3 (+) - Chassis ground (-): |
Is the voltage 10 V or more? | Replace the body integrated unit. < Ref. to BODY INTEGRATED UNIT . > | Repair or replace the harness. |