Combination Switch (Wiper): Inspection: Notes
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Operate the switches to check the continuity between terminals.TERMINAL REFERENCE CHART
Switch position Terminal No. Standard Front OFF 7 and 16 Less than 1 Ω INT 7 and 16 Less than 1 Ω LO 7 and 17 Less than 1 Ω HI 8 and 17 Less than 1 Ω Washer ON 2 and 11 Less than 1 Ω Rear OFF 2 and 10
10 and 12
2 and 121 MΩ or more INT 2 and 13 Less than 1 Ω ON 2 and 10 Less than 1 Ω Washer ON 2 and 12 Less than 1 Ω - Replace the switch if the inspection result is not within the standard value.