Fuel Pump Control Module: Installation
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Install the FPCM, then install the FPCM bolts and tighten to 9 Nm (80 lb-in).
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Connect the FPCM electrical connector.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Install the LR splash shield, then install the LR splash shield retainers and tighten to 3.0 Nm (27 lb-in).
 Courtesy of FORD MOTOR COMPANY
|