10-Brake Fluid: Replacement
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not let brake fluid come into contact with the painted surface of the vehicle body. Wash away with water immediately and wipe off if it is spilled by accident.
- Avoid mixing brake fluid of different brands to prevent fluid performance from degrading.
- Be careful not to allow dirt or dust to enter the reservoir tank.
NOTE:
- During the operation, keep the reservoir tank filled with brake fluid to prevent entry of air.
- Operate the brake pedal slowly.
- For convenience and safety, perform the work with 2 people.
- The required amount of brake fluid is approximately 500 m fi (16.9 US fl oz, 17.6 Imp fl oz) for the entire brake system.
- Lift up the vehicle and set rigid racks at the specified locations, or keep the vehicle lifted.
- Remove both the front and rear wheels.
- Drain brake fluid from the reservoir tank.
- Refill the reservoir tank with recommended brake fluid.
Recommended brake fluid:
Refer to the " SPECIFICATIONS " . < Ref. to SPECIFICATION , General Description . >
Perform the same procedure as for bleeding the brake line, until new brake fluid comes out from vinyl tube. < Ref. to PROCEDURE , Air Bleeding . >