Seat Backrest Heater Mat: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

If needed, install a new backrest foam pad.

2.

NOTE: Remove all paper strips from the adhesive before applying the heater mat to the foam pad. Otherwise, damage to the seat can occur.

Install the heater mat to the foam pad.
- Align the heater mat square to the seat backrest with the narrow area of the heater mat tucked into the valley of the foam pad and the wiring toward the lower edge.
- Firmly apply the heater mat to the foam pad making sure it is straight and free of any wrinkles that may show through the backrest cover.

3.

Route the heater mat wire harness as noted in removal.

4.

Install the seat backrest cover. For additional information, refer to Seat Backrest Cover - Second Row, 40 Percent .