April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Backrest - Third Row, 60 Percent: Disassembly

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row .

1.

Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Third Row .

2.

Remove the safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

3.

Remove the backrest foam pad.

4.

Remove the nut, screw and support bracket.

5.

Remove the outboard latch-to-cushion frame bolt and outboard latch.
- To install, tighten to 35 Nm (26 lb-ft).

6.

Remove the 2 inboard latch-to-backrest frame bolts and inboard latch.
- To install, tighten to 55 Nm (41 lb-ft).

7.

Remove the 4 screws and safety belt retractor cover.

8.

Remove the safety belt retractor bolt.
- To install, tighten to 40 Nm (30 lb-ft).

9.

Pinch to release the safety belt guide and remove the safety belt retractor.
- Route through the backrest frame.

GFD137642

Courtesy of FORD MOTOR COMPANY

10.

Remove the 15 screws and backrest support panel.

11.

Remove the bolt and child safety seat tether anchor.
- To install, tighten to 15 Nm (133 lb-in).

GFD137643

Courtesy of FORD MOTOR COMPANY

12.

To assemble, reverse the disassembly procedure.