Seat Backrest - Second Row, 20 Percent: Disassembly
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For parts identification and locations, refer to Seat - Exploded View, Second Row .
- 1.
Remove the seat backrest. For additional information, refer to Seat Backrest - Second Row, 20 Percent .
- 2.
Remove the safety belt guide cover.- Insert an appropriate tool into the holes and release the 3 locking tabs.
- Detach the safety belt guide cover.
- Route the safety belt webbing through the slot.
- 3.
Remove the latch release handle bezel.- Release the upper tab and separate the bezel from the latch release handle.
- 4.NOTE: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.
Separate the hook-and-loop strips and invert the backrest trim cover to the row of hog rings.
- 6.
Continue inverting and remove the backrest cover.- Route the safety belt webbing through the backrest cover opening.
- 12.
Remove the safety belt retractor.- Route out the safety belt webbing, guide, tongue and anchor through the backrest frame.
- Note safety belt routing for correct installation.