Clear Memory Mode: Operation
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Shift the select lever to "P" range.
- Using the Subaru Select Monitor, on the << Main Menu >> display, select {Each System Check}.
- On << Each System Check Menu >> display, select {Transmission Control System}.
- After transmission type information is displayed, select [OK].
- On << transmission Diagnosis >> display, select {Clear Memory}.
- When "Done. Turn off the ignition switch." is displayed, select [OK].
- Turn the ignition switch to OFF. To turn the ignition switch to ON again, wait for 10 seconds or more.
- Turn the Subaru Select Monitor to OFF.NOTE:
- If {Clear Memories 2} is executed, DTCs and learned control memory are cleared.
- If {Clear Memories 2} is executed, perform learning. < Ref. to LEARNING CONTROL . >