Transmission Mount, Installing
NOTE:
Refer to "Transmission Mount Removing" to get a list of the special tools needed. Refer to TRANSMISSION MOUNT, REMOVING .
- The Three-Phrase Current Drive -VX54- is held in the installation position with the : VAS6931 .
-- Install the transmission mount using the : VAS5085 and secure (bolts -2 and 1-.
-- When all subframe mount bolts are tightened to the tightening specification, remove the : VAS6931 and the : 3282 .
-- Install the pendulum support with new bolts. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
-- Install the Electric Drive Power and Control Electronics -JX1- and bracket. Refer to [For engine(s) EAZA] Electric Drive Power and Control Electronics .
Tightening Specifications
Transmission mount. Refer to OVERVIEW - SUBFRAME MOUNT .