Engine Coolant Temperature Sensor -G62- CONNECTOR ASSIGNMENT, FSI ENGINES
WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Procedure
-- Disconnect the 2-pin connector at the Engine Coolant Temperature Sensor -G62-. Refer to COOLANT PUMP, REMOVING AND INSTALLING - the sensor is not removed.
Assignment of the 2-pin connector at Engine Coolant Temperature Sensor -G62-
- Sensor ground
- Wire connection from Engine Coolant Temperature Sensor -G62- to engine control module