Overview - Engine Pump Assembly

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

The engine pump assembly is not serviceable. If there are customer complaints, the cause must be determined using a pressure and leak test. If there is a malfunction, replace the engine pump assembly.

NOTE:

Always replace seals.

Do not reuse fluid you have drained.

If power steering fluid is low in the reservoir, check the steering system for leaks.

If there are leaks in the area of the line connections, the lines/connections must first be inspected for leaks, tightened as necessary and wiped dry.

Fluid type: Hydraulic Fluid: G 004 000 M2

Fig 1: Exploded View Of Power Steering Pump Assembly

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Engine Pump Assembly
- With Power Steering Control Module -J500-
- Repairs are not possible.
- Removing and installing. Refer to MOTOR PUMP ASSEMBLY, REMOVING AND INSTALLING .
Clamp
- Install on the marking on the intake hose.
- For the allocation. Refer to the Parts Information.
Suction Hose
Seal
- Always replace
Bearing
- 8 Nm
- Check for damage, cracks in the rubber, metal plate detached from the rubber, replace if necessary
Bolt
- 20 Nm
Pressure Line
NOTE:
Push it all the way into the engine pump assembly when installing
Nut
- 8 Nm
- Quantity: 4
Bracket
Bolt
- 9 Nm
- Additionally secure the coolant line bracket
Bolt
- 25 Nm
- Quantity: 3