Control Module And Hydraulic Unit, Removing And Installing

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench 1410: VAG1410
Brake Pedal Actuator: VAG1869/2 .

Sealing Plug Repair Set, Part No. 1H0 698 311 A

Fig 1: Identifying Sealing Plug Repair Set, Part No. 1 H0 698 311 A

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

After separating the control module from the hydraulic unit, the transport protection for valve body must be placed on the hydraulic unit.

Warranties will not be granted for hydraulic units without transport protection.

1 - Transport protection for valve body (foam)

2 - M10 plug

3 - M12 plug

Component location:

The control module is bolted to the hydraulic unit and is located at right in the plenum chamber.

WARNING:

Do not bend the brake lines near the hydraulic unit.