Overview - Instrument Cluster

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Instrument Cluster

Courtesy of AUDI OF AMERICA, LLC

Outside Air Temperature Sensor -G17-
- Removing and installing. Refer to OUTSIDE AIR TEMPERATURE SENSOR, REMOVING AND INSTALLING .
Connector
- For Outside Air Temperature Sensor -G17-
Oil Level Thermal Sensor -G266-
- Removing and installing. Refer to [For engine(s) CEUA, CGTA] Oil Level Thermal SensorG266, Removing and Installing , [For engine(s) CPNA] Oil Level Thermal Sensor G266, Removing and Installing or [For engine(s) CEJA] Oil Level Thermal SensorG266, Removing and Installing .
Oil Pressure Switch
- Removing and installing. Refer to [For engine(s) CEUA, CGTA] OIL PRESSURE SWITCHES -F22- / -F378-, REMOVING AND INSTALLING , [For engine(s) CPNA] Oil Pressure Switch -F22- -F22- / Reduced Oil Pressure Switch -F378-, REMOVING AND INSTALLING or [For engine(s) CEJA] Oil Pressure Switch -F22-, REMOVING AND INSTALLING .
Windshield Washer Fluid Level Sensor -G33-
- Removing and installing. Refer to WINDSHIELD WASHER FLUID LEVEL SENSOR, REMOVING AND INSTALLING .
Analog Clock -Y-
- Removing and installing. Refer to CLOCK, REMOVING AND INSTALLING .
Instrument Cluster
- With Instrument Cluster Control Module -J285-
- Removing and installing. Refer to INSTRUMENT CLUSTER WITH Instrument Cluster Control Module -J285-, REMOVING AND INSTALLING .
- Multi-pin connector pin assignment. Refer to INSTRUMENT CLUSTER MULTI-PIN CONNECTOR CONTACT ASSIGNMENT .
Fiber Optic Cable Connector
- Seal with Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9
Connector
- For instrument cluster
Bolt
- 3 Nm
Bolt
- 3 Nm
Fuel Level Sensor -G-
- Multi-pin connector assignment. Refer to Fuel Level Sensor -G- CONNECTOR ASSIGNMENT .
Fuel Level Sensor 2 -G169-
- Multi-pin connector assignment. Refer to Fuel Level Sensor 2 -G169- CONNECTOR ASSIGNMENT .
Rear Brake Pad Wear Sensor
- Left Rear Brake Pad Wear Sensor -G36-, Right Rear Brake Pad Wear Sensor -G37-
- Removing and Installing. Refer to BRAKE PAD WEAR SENSOR, REMOVING AND INSTALLING .
Brake Fluid Level Warning Switch -F34-
- Removing and Installing. Refer to Overview - Brake Booster/Brake Master Cylinder .
Front Brake Pad Wear Sensor
- Left Front Brake Pad Wear Sensor -G34-, Right Front Brake Pad Wear Sensor -G35-
- Removing and Installing. Refer to BRAKE PAD WEAR SENSOR, REMOVING AND INSTALLING .
Engine Coolant Level Warning Switch -F66-