Selector Lever Handle, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Ignition switched off

-- If equipped remove the ignition key.

-- Wait until the lamp in the Selector Lever Transmission Range Position Display Unit -Y26-, -2- turns off.

Fig 1: Identifying Selector Lever Release Button

Courtesy of AUDI OF AMERICA, LLC

-- Pull the selector lever handle upper section -1- upward.

Fig 2: Identifying Selector Lever Handle Upper Section

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

Fig 3: Locating Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Pull the selector lever handle upper section -2- upward.