Distance Regulation Control Module -J428- /Distance Regulation Control Module 2 -J850-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air intake grille. Refer to ATTACHMENTS, REMOVING AND INSTALLING .
-- Unclip the cover.
-- Remove the bolts -1 to 4-.
-- Remove the distance regulation control module -A- from the bumper cover.
NOTE:
Clean and dry the area around the control module connector.
-- Disconnect the connector -arrow-.