Overview - Ignition System
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Engine Speed Sensor -G28- is on the cylinder block -item 26- PART II .
- Ignition Coils with Power Output Stage - N70, N127, N291, N292, N323, N324-
- Remove and install with : T10095A
- Connector
- Black
- Use the : T10118 to remove
- Bracket
- For the Knock Sensor 1 - G61- connector
- Bolt
- 20 Nm
- Connector
- Black, 3-pin
- Gold plated sensor contacts and connector contacts
- Knock Sensor 1 -G61-
- Installed location: cylinder block exhaust side
- Bolt
- 20 Nm
- Tightening specifications affect function of knock sensor
- Exhaust Camshaft Adjuster
- Identification: 32A
- With sensor wheel for the Camshaft Position Sensor 2 -G163-
- Camshaft adjuster with camshaft timing chain, installing. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .
- Cover
- Connector
- Black, 3-pin
- Gold plated sensor contacts and connector contacts
- Bolt
- 10 Nm
- Camshaft Position Sensor 2 -G163-
- For the exhaust camshaft
- Gold plated sensor contacts and connector contacts
- O-ring
- Always replace
- Camshaft Position Sensor -G40-
- For the intake camshaft
- Gold plated sensor contacts and connector contacts
- Knock Sensor 2 -G66-
- Installed location: cylinder block intake side
- Gold plated sensor contacts and connector contacts
- Connector
- Black, 2-pin
- Gold plated sensor contacts and connector contacts
- Intake Camshaft Adjuster
- Identification: 24E
- With sensor wheel for the Camshaft Position Sensor - G40-
- Camshaft adjuster with camshaft timing chain, installing. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .
- Spark Plug
- 18 Nm
- Remove and install with the :3122B
- Type and electrode gap. Refer to TEST DATA AND SPARK PLUGS .
- Control Housing
- For the camshaft adjustment
- Removing and installing. Refer to CAMSHAFT, REMOVING AND INSTALLING .