DTC C200C: Steering Shaft Torque Sensor 2: Description
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
The PSCM continually monitors the steering shaft torque sensor when the ignition is ON and the voltage supply to the PSCM is above 6 volts.
- DTC C200C:49 (Steering Shaft Torque Sensor 2: Internal Electronic Failure) - If the steering shaft torque sensor signal is outside the expected range, DTC C200C:49 is set.