Camshaft Position Sensor, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1- on cylinder bank 1.

-- Remove the bolt -arrow- and the Camshaft Position Sensor -G40-.

-- Disconnect the connector -1- on cylinder bank 2.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- and the Camshaft Position Sensor 2 -G163-.