LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> e-Golf Limited Edition >> Repair and Diagnosis >> Body & Frame >> Windows >> Front Doors, Central Locking System >> 57 Front Doors, Central Locking System >> Door Components >> Door Lock, Removing And Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Door Lock, Removing And Installing

Special tools and workshop equipment required 

NOTE:

The following describes the removal and installation of the left door lock. The right side is identical.

The door window must be closed for the following work procedures.

Removing 

GWWN57-10537Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the door inner cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .

-- Remove the door handle. Refer to DOOR HANDLE, REMOVING AND INSTALLING .

-- If equipped, disconnect the connector.

-- Remove the bolts -2-.

-- Remove the door lock -1- from the door -arrow-.

NOTE:

If it is necessary for the following work steps, loosen the cables.

Cable to Mounting Bracket, Loosening 

-- Remove the cover. Refer to the information below.

-- Turn the cable -5- 90° -arrow a- and remove it from the bracket.

-- Pivot the cable upward -arrow b- until it can be guided out of the eye in the door lock -1- -arrow c-.

Cable to Interior Door Mechanism, Loosening 

-- Turn the cable -4- 90° and remove it from the bracket.

-- Pivot the cable -arrow d- until the cable can be guided out of the eye in the door lock -1- -arrow e-.

Cover, Removing 

GWWN57-10559Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the hook -3- in direction of -arrow a-.

-- Pull the cover -1- with the hook from the door lock -2- -arrow b-.

-- Remove the cover -1- upward -arrow c- from the door lock -2-.

Installing 

GWWN57-10538Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the removed cables -4- and -5- on the door lock -1-.

-- Install the cover. Refer to the information below.

-- Insert the door lock -1- into the door.

-- If equipped, connect the connector.

-- Install the bolts -2-.

-- Install the cap -3-.

Perform the rest of the installation in the reverse order of removal.

Then a function test must be performed with the door opened. If the cables are not set or engaged properly, the door lock cannot be released and therefore the door cannot be opened.

Tightening Specifications 

Cover, Installing 

GWWN57-10558Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the cover -1- onto the bracket -3- on the door lock -2- -arrow a-.

-- Engage the hook -4- with the door lock -2- -arrow b-.