Steering Wheel, Removing And Installing: Removing
WARNING:
Before performing work on the electrical system and removing the steering wheel, the following conditions must be met:
- Disconnect the battery ground cable. Refer to BATTERY .
- The wheels must be in the straight position.
The airbag system may fail during future operation if these warnings are not followed!
-- Move the steering column to the center height position.
-- Remove the airbag unit. Refer to [DRIVER SIDE AIRBAG .
-- Bring wheels in the straight position.
NOTE:
Removal and installation of steering wheel must take place in center position (wheels in straight-ahead position).
-- Remove the bolt -1-.
-- Mark the position of the steering wheel/steering column.
-- Remove the steering wheel -2- from the steering column.