Checking And Adjusting Conditions
NOTE:
The use of additional weight is discontinued.
For that reason, different angle dimension settings are used on the headlamp adjusting unit.
When using the maintenance tables, the adjustment values are also shown in the vehicle-specific maintenance list from MY 2014.
In the US, Canadian, and Mexican markets, headlamps with SAE approval are used in vehicles.
The headlamp adjustment from MY 2014 is invoiced separately.
- Tire pressure OK
- Cover lenses must not be damaged or dirty.
- Reflectors and bulbs OK
- Move vehicle back and forth for a few meters or bounce the front and rear of vehicle several times up and down to settle the springs.
- The vehicle and the headlamp adjusting unit must be on level ground.
- Vehicle and headlamp adjusting unit must be aligned.
- Angle dimension must be set.
- Pay attention to the Headlamp Adjusting Unit Owner's Manual.