Emissions Sticker Value

DURING THE PRACTICAL EMISSIONS TEST, THE TECHNICIAN IS REQUIRED TO USE THE VEHICLE-RELEVANT EMISSIONS STICKER VALUE ON THE TYPE PLATE AS THE EMISSIONS TEST THRESHOLD.

IF THERE IS NOT AN EMISSIONS STICKER VALUE, THEN THE TURBIDITY VALUE GIVEN BY THE MANUFACTURER ON ELSA MUST BE USED.

IF THERE IS NOT A EMISSIONS TEST STICKER VALUE OR A MANUFACTURER VALUE FOR THE VEHICLE, THEN THE LEGAL TURBIDITY VALUE (2.5 M ^-1 OR 1.5 M ^-1 DEPENDING ON THE REGISTRATION DATE) MUST BE USED.

A TURBIDITY VALUE OF MAXIMUM 0.5M ^-1 APPLIES TO ALL EURO 6 VEHICLES.

EMISSIONS TEST SPECIFIED DATA INPUT AS BAR CODE:

-- IF THE EMISSIONS TEST SPECIFIED DATA IS AVAILABLE AS A BAR CODE, SCAN IN THE BAR CODE OF EMISSIONS TESTING DATA SHEET USING BAR CODE READER.

IF THE TURBIDITY VALUE ON THE EMISSIONS TESTING DATA SHEET DEVIATES FROM THE EMISSIONS STICKER VALUE ON THE TYPE PLATE, THE EMISSIONS STICKER VALUE IS TO BE REGISTERED MANUALLY.