LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> Jetta GLI, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Controls & Housing System (Service Information - Automatic Transmission - 09G)) >> 37 Controls, Housing >> Selector Mechanism >> Selector Lever Cable, Checking And Adjusting >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Cable, Checking And Adjusting: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required 

Short Description 

To check the selector lever cable for ease of movement, remove it from the transmission and position the removed end so it does not make contact anywhere.

Then selector lever is moved and the selector lever cable installed again on the transmission.

After that, selector lever cable must be adjusted. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

Do not grease the selector lever cable connection!

scientia non olet · About LEMON Manuals