Axle Oil In Bevel Box, Installing: Notes

Special Tools And Workshop Equipment Required

NOTE:

The bevel box is attached to the side of the transmission and has its own oil system.

Bevel box gear oil specification. Refer to the Parts Information.

Requirements

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Place the :VAS6208 underneath.

NOTE:

Cover the area under the drain plug -arrow- with a cloth.

-- Remove the transmission fluid filler plug -arrow- from the bevel box.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

It is necessary to replace the transmission fluid filler plug -arrow-.

Oil level is correct if bevel box is filled with oil as far as bottom edge of the oil fill hole.

If oil comes in contact with bevel box, remove the bevel box carefully.

-- Fill with gear oil. Refer to GEAR OIL IN BEVEL BOX, FILLING .

-- Insert new oil filler plug -arrow- and tighten.