Overview - EVAP System [XXXX]
- Vent Line
- To the EVAP Canister Purge Regulator Valve 1 -N80-
- Clipped to the fuel tank
- To disconnect, press the release button on the connecting piece
- The connector couplings must >>audibly<< engage when locking.
- Pull on the connector coupling to make sure it is secure.
- Ventilation, Checking. Refer to FUEL TANK, CHECKING VENTILATION .
- Connection Diagram. Refer to CONNECTION DIAGRAM ON EVAP CANISTER .
- Connector Couplings, Disconnecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bolt
- 20 Nm
- EVAP Canister
- Component location: at the right rear in the wheel housing under the wheel housing liner
- Ventilation, Checking. Refer to FUEL TANK, CHECKING VENTILATION .
- Removing and installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Vent Line
- To the fuel tank
- To disconnect, press the release button on the connecting piece
- The connector couplings must >>audibly<< engage when locking.
- Pull on the connector coupling to make sure it is secure.
- Ventilation, Checking. Refer to FUEL TANK, CHECKING VENTILATION .
- Connection Diagram. Refer to CONNECTION DIAGRAM ON EVAP CANISTER .
- Connector Couplings, Disconnecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .