Transmission Mount, Removing And Installing: Removing

-- Remove the battery tray. Refer to BATTERY .

-- Remove the Engine Control Module -J623- from the bracket with the lines still connected. Refer to Engine Control Module -J623- , REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the bracket -1- .

NOTE:

Depending on the version different brackets are installed.

-- Unclip the wiring guide -1- upward and move it slightly to the side in direction of -arrows- .

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Remove the bolts -2- , then the bolts -arrows- and remove the transmission mount -1- .