Engine, Securing To Engine And Transmission Holder: Procedure

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Unlock the retaining tab in direction of -arrow- and remove the engine cover mount -1- .

-- Hook the :2024A to the engine and to the :VAS6100 .

NOTE:

To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

WARNING:

Loose engine support bridge components could cause an accident.

Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows- .

-- Lower the engine from the :VAS6931 using the :VAS6100 .

-- Remove the transmission alignment sleeve and secure the transmission side of the engine on the :VAS6095 .