Engine And Transmission, Separating, Vehicles With Manual Transmission
Special tools and workshop equipment required
- Shop Crane:VAS6100
- Transmission Lift Hook:T40013
- Engine Support Bridge - Additional Hooks (2 pc.):10-222A/2
Procedure
- Engine/transmission assembly removed and secured on the :T10359 .
-- Free up the wire on the bracket -arrow- .
-- Remove the bolts -1 and 2- and then remove the starter from the transmission.
-- Free up the wiring harness -1 and 2- from the air guide pipe.
-- Loosen the screw-type clamp -3- .
-- Remove the bolts -arrows- and remove the air guide pipe.
-- Remove the bolts -arrows- and remove the transmission support.
-- Install the :T40013 on the transmission and close the locking device.
-- Engage the :VAS6100 with :10-222A/2 on the lifting tackle.
-- Remove the bolts -1, 2, 3, 6, 7, 8 and 9- connecting the transmission to the engine.
NOTE:
Ignore -4, 5 and A- .
-- Remove the transmission from the engine.