Undamaged Window Glass, Preparing For Installation
ADHESIVE BEAD, CUTTING
Keep the adhesive surface free of dirt and grease.
Do not yet treat the cut adhesive surface with the activator. Do not prime. Do not use a cleaning solution.
When reusing an undamaged window, cut the remaining adhesive sealant back to 1 to 2 mm shortly before rebonding. Do not damage the primer and ceramic coating at the same time.
The remaining material acts as a base for the new adhesive sealant to be applied.
Exception: If the bonding is going to be performed longer than one day after cutting back the adhesive bead, then the remaining material must be activated with the Activator.
Apply the activator evenly in a single stroke using the Applicator.
Do not let the activator come in contact with the paint, otherwise this will damage the paint.
Drying time is approximately 10 minutes