Front Door Window, Removing And Installing: Removing
-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the door inner cover -3-. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
-- Pry out the cable bushing.
-- Lower the door window -2- until the hooks -7- in the door window are accessible.
If it is not possible to do this step because the window regulator motor is faulty, then remove the window regulator motor -5-.
Then the door window can be moved to the necessary position.
-- Carefully push the hooks -7- through the opening in the window glass. While doing so, slightly lift the door window so that it does not fall back into the hooks.
-- Remove the door window -1- upward from the window regulator.
-- Lift the door window -1- at the rear and pivot it forward out of the window guides -2- in direction of -arrow-.