New Window Glass, Preparing For Installation

NOTE:

The application area for the adhesive bead is not pre-coated and not primed.

The sealing lip is a component of a new windshield.

Not all windows are pre-coated.

-- Clean an area 20 mm wide all around the window edge using the Cleaning Solution:D 009 401 04 .

-- Then dry the window edge with a lint-free cloth.

WARNING:

The ceramic coating on the glass is not a glass/paint primer. The ceramic coating must always be primed before applying the adhesive sealant. Use only glass/paint primer D 009 200 02.

-- Apply the glass/paint primer -2- evenly in one stroke using the Applicator:D 009 500 25 -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Drying time is approximately 10 minutes

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The distance of the glass/paint primer and the adhesive bead to the window outer edge changes at the bottom the windshield.

-- The -dimension b- is 6 mm to the outer edge, up to the -dimension a- = 150 mm to the lower edge of the windshield.

-- From there to the radius the distance grows to 20 mm -dimension d-.

-- At approximately half of the distance the -dimension c- should be 10 mm.