Service Interval Display, Resetting With Vehicle Diagnostic Tester
NOTE:
If the displays indicated in the procedure are not shown on the display, refer to the Vehicle Diagnostic Tester Operating Instructions.
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to Vehicle Diagnostic Tester . |
| -- Switch the ignition on. |
| -- Perform the vehicle identification. |
| -- Select "Work with guided fault finding" |
| -- Select the "control module" |
| -- Select "Instrument Cluster". |
| -- Select "identify control module". |
| -- Select "Guided Functions". |
| -- Select the corresponding service that is to be reset. |
| -- Perform the adaptation according to the "Guided Functions". |