Common Specs & Procedures

SPECIFICATIONS INDEX

System		Specification/Procedure
Air Conditioning
Service
	R134a	WORKING WITH A/C SERVICE STATION
	R1234yf	WORKING WITH A/C SERVICE STATION
Torque		OVERVIEW - A/C COMPRESSOR POWER UNIT
Axle Nut/Hub Nut/Wheel Bearing Unit Bolt
Front		200 Nm + 180°
Rear		Refer to the appropriate procedure in OVERVIEW - WHEEL BEARING
Battery		BATTERY
Brakes
Bleeding Sequence		HYDRAULIC SYSTEM
Disc Brakes		FRONT BRAKES REAR BRAKES
Torque		Refer to the appropriate procedure in HYDRAULIC SYSTEM Refer to the appropriate procedure in MECHANICAL COMPONENTS
Charging
Generator		GENERATOR
Torque		OVERVIEW - GENERATOR
Drive Belts
Adjustment		RIBBED BELT, REMOVING AND INSTALLING (CXBA, CXBB) or RIBBED BELT, REMOVING AND INSTALLING (CRUA)
Belt Routing		OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (CXBA, CXBB) or OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE (CRUA)
Engine Cooling
General Service Specifications		Refer to the appropriate FLUID CAPACITY TABLES information.
Radiator Cap Pressure		PRESSURE RELIEF VALVE IN CAP, CHECKING
Thermostat R & I		N/A
Water Pump R & I		COOLANT PUMP/THERMOSTAT
Engine Mechanical
	Compression	COMPRESSION, CHECKING (CRUA) or COMPRESSION PRESSURE, CHECKING (CXBA, CXBB)
Oil Pressure		OIL PRESSURE, CHECKING (CRUA) or OIL PRESSURE, CHECKING (CXBA, CXBB)
Overhaul
	CXBA, CXBB	Refer to the appropriate procedures in ENGINE ASSEMBLY SYSTEM (SERVICE INFORMATION - CXBA, CXBB) or ENGINE SYSTEM (CRANKSHAFT & CYLINDER BLOCK - SERVICE INFORMATION - CXBA, CXBB) or ENGINE SYSTEM (CYLINDER HEAD & VALVETRAIN - SERVICE INFORMATION - CXBA, CXBB)
	CRUA	Refer to the appropriate procedures in ENGINE ASSEMBLY SYSTEM (SERVICE INFORMATION - CRUA) or ENGINE SYSTEM (CRANKSHAFT & CYLINDER BLOCK - SERVICE INFORMATION - CRUA) or ENGINE SYSTEM (CYLINDER HEAD & VALVETRAIN - SERVICE INFORMATION - CRUA)
Torque
	CXBA, CXBB	Refer to the appropriate procedures in ENGINE ASSEMBLY SYSTEM (SERVICE INFORMATION - CXBA, CXBB) or ENGINE SYSTEM (CRANKSHAFT & CYLINDER BLOCK - SERVICE INFORMATION - CXBA, CXBB) or ENGINE SYSTEM (CYLINDER HEAD & VALVETRAIN - SERVICE INFORMATION - CXBA, CXBB)
	CRUA	Refer to the appropriate procedures in ENGINE ASSEMBLY SYSTEM (SERVICE INFORMATION - CRUA) or ENGINE SYSTEM (CRANKSHAFT & CYLINDER BLOCK - SERVICE INFORMATION - CRUA) or ENGINE SYSTEM (CYLINDER HEAD & VALVETRAIN - SERVICE INFORMATION - CRUA)
Fluid Specifications		See FLUIDS under MAINTENANCE tab.
Engine Oil Drain Plug		30Nm
Flywheel/Flex Plate Torque		60 Nm +90°
Fuel System
Pressure Specification		N/A
Fuel Pressure Test Procedure		TRANSFER FUEL PUMP -G6-, CHECKING (CXBA, CXBB) or FUEL PRESSURE, CHECKING (CRUA)
Ignition
Firing Order & Cylinder Identification		FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug		06K 905 601 D
Starting
Starter		STARTER
Torque		Refer to the appropriate procedures in OVERVIEW - STARTER
Wheel Alignment
Adjustment Specifications		AXLE ALIGNMENT SPECIFIED VALUES
Torque		N/A
Wheel & Tire
Wheel Lug Nut Torque		120 Nm